10mm Bullets
10mm Bullets for Reloading
This page features our 10mm bullets that are used to reload. If you are looking for loaded rounds that are ready to shoot, please head to our 10mm ammo page.
The 10mm is kind of the “redo” of pistol cartridges. Its handgun and recoil were both deemed too heavy by many law enforcement officers, so the 40 S&W was created to take the 10mm’s place. But you personally don’t mind a little more recoil when it goes along with the 10mm’s immense power.
Many people have noted that quality matters even more than usual when it comes to the 10mm. That plus its high price tag encourages a lot of shooters to reload the massive round. The 10mm’s parent case is obscure by now – production of the 30 Remington pretty much ceased by the late 1980s. Fortunately new 10mm brass is popular enough, as are the large pistol primers and conventional powders you need to reload it.
10mm bullets for reloading are typically jacketed and range in weight from 135 to 200 grains. JHPs and XTPs will make fine self-defense loads, and you can even make your own hunting cartridges. Several states allow hunters to take whitetail with 10mm. Just be certain to follow the 37,500 psi pressure limit and you can do whatever you like with your .400 diameter bullets.
-
Speer .400 Diameter Bullets - 180 Grain TMJ - 400 Count
$69.85
$34.85
Cost Per Bullet 8.7¢ per bullet Product Type Bullets Bullet Weight 180 Grain Bullet Caliber 10mm, 40 S&W Quantity 400 Bullet Type Total Metal Jacket (TMJ) Manufacturer Speer Manufacturer SKU 4734 Customer Reviews
-
What can you say about GoldDots?
-
I've done a LOT of bullet testing over the years, Speer's GoldDots have always preformed as advertised.
Review by knitepoet (Posted on 4/17/2016)
-
-
Berry's 40 Cal Bullets 180 Grain Plated RS DS – 1000 Rounds
$119.85Cost Per Bullet 12¢ per bullet Product Type Bullets Bullet Weight 180 Grain Bullet Caliber 10mm, 40 S&W Quantity 1000 Bullet Type Plated Round Nose Flat Point Manufacturer Berry's Manufacturer SKU 9911 Berry's bullets have earned a reputation for being affordable and consistent. These 40 S&W projectiles are 180 grains, copper-plated, Round Shoulder Double Struck (RSDS) and are a great choice for reliable range loads. Each projectile is swaged and plated to its final weight, then each bullet is re-struck to ensure consistent sizing and plating. These bullets will not foul your barrel like traditional cast lead projectiles and are more affordable than jacketed bullets.
Widener's also offers a wide selections of primers, brass and powders to help you make the perfect load.
Note: Plated Bullets are not recommended for velocities over 1200 feet-per-second
**This is not loaded ammunition.**Customer Reviews
-
Have used these for years for plinking and target shooting
-
These are a good bullet for reloading, plinking and target shooting. Have used them for years.
Review by Doc H (Posted on 8/18/2024)
-
Quality product at a fair price
-
Berry’s DS are great for target shooting for anyone who is reloading.
Review by Chard (Posted on 11/13/2023)
-
Great price, good quality
-
Have used Berrys for 9mm -Luger, 9mm Makarov , 40-S&W and 45ACP, never a problem with quality or value.
Review by MB (Posted on 4/24/2022)
-
Excellent service
-
Ordering was easy. Delivery was fast and the product was as advertised. I will definitely order again.
Review by Jordan (Posted on 10/8/2020)
-
Not good in a Glock 20
-
These bullets constantly fail to feed in a stock Glock 20 barrel. They feed OK in a KKM precision barrel, so-so in a Storm Lake barrel.
Review by David (Posted on 9/12/2020)
-
Bullets are great
-
Bullets are great the only thing that upset me was when I was walking up the stairs at my apartment I kept finding random .40 cal bullets laying on the steps. After the trail of bullets I got my package and the box was spilling out bullets. I haven’t counted but hopefully I didn’t lose too many between shipping and and the arrival. Better packaging would be great
IMG_9959.JPGReview by Zach (Posted on 3/30/2019)
-
-
Zero Bullets 40 S&W (.400" Diameter) 165 Grain FMJ-TC - 500 Projectiles
$63.85Cost Per Bullet 12.8¢ per bullet Product Type Bullets Bullet Weight 165 Grain Bullet Caliber 10mm, 40 S&W Quantity 500 Bullet Type Full Metal Jacket Truncated Cone (FMJTC) Manufacturer Zero Bullet Manufacturer SKU 166 These lightweight, 165 grain projectiles from Zero Bullets are great for crafting cartridges in both .40 Smith & Wesson and 10mm Auto. These bullets measure .400 inches in diameter and feature a full metal jacket (FMJ) as well as a truncated cone (TC) shape. FMJ-TC rounds are similar to semi-wadcutters and will make clean, recognizable holes in targets which makes competitive scoring or productive practice that much easier. 165 grains is light for both calibers and quite popular for a number of loads. Zero Bullets is company located in Alabama that is well known for great projectile quality at a low price.
While you're here, check out Widener's great selection of pistol powders.Customer Reviews
-
A quality and consistent product
-
...
Review by Charles (Posted on 9/25/2023)
-
Good bullet for a great price.
-
This is a great bullet. It was a good batch no imperfections, they worked great in my bullet feeder.
Review by Irishracer (Posted on 7/17/2023)
-
Excellent
-
Excellent product
Review by Sal (Posted on 3/6/2023)
-
Quality & price
-
These bullets were true to uniformity, and loaded very well. Could not find a better price anywhere.
Review by Frank (Posted on 9/12/2022)
-
-
Zero Bullets 40 S&W (.400" Diameter) Bullets 200 Grain FMJ-TC – 500 Projectiles
$69.85Cost Per Bullet 14¢ per bullet Product Type Bullets Bullet Weight 200 Grain Bullet Caliber 10mm, 40 S&W Quantity 500 Bullet Type Full Metal Jacket Truncated Cone (FMJTC) Manufacturer Zero Bullet Manufacturer SKU 144 These bullets are great for making practice and match ammo for your 10mm Auto and .40 S&W pistols. These .400 inch diameter projectiles from Zero Bullets possess a full metal copper jacket (FMJ) and a truncated cone (TC) shape. FMJ-TC bullets are ideal for matches and practice because their overall shape allows for proper feeding while their flat noses leave easily discerned holes in paper and cardboard targets for easy scoring or group measurement. In addition, these rounds weigh in at 200 grains which is on the heavier side of either caliber and easily supported by widely available load data. Zero Bullets manufacture their products in Cullman, Alabama and are well-known to reloaders for their consistent quality.
Be sure to check out Widener's great selection of pistol powders, while you're browsing.Customer Reviews
-
bullet performance
-
ordered the 40/10mm zero fmj tc for use in my glock AND my sw 610.
was not disappointed! for a non-expanding max penetration semi-auto round this would be hared to beat! a max load in my g20 put a bullet through 9 milk jugs of water and zipped off into the sunset!! impressive!Review by bob (Posted on 10/2/2023)
-
Great for 10mm practice loads
-
Great for M&P 10mm practice loads. I use Titegroup for my 1000 fps practice loads.
Review by Andy (Posted on 9/8/2022)
-
Great 10mm heavy loads. I will buy again
-
Excellent very happy with these bullets. I do both sonic and subsonic rounds, work well! Good price, timely shipping, will buy again. Both 180 grain and 200!!!!
Review by KHans (Posted on 5/9/2022)
-
Great so far
-
I've loaded about 150 of them so far and they are very consistent and shoot great! 10/10 would buy more
Review by Joe (Posted on 1/23/2022)
-
Outstanding bullet and price
-
I ordered these bullets just a few days ago and received them on 6-24-16. I loaded some up at three different powder charges of AA9 using once fired brass. At 10 yards the lowest loading gave me an average velocity of 1165fps for an energy level of 603ft/lbs. Holy cow! That should take care of about anything in the lower 48 states. Accuracy was outstanding; out of 5 shots at 10 yds 4 made one jagged hole and the 5th was just 1/8" away.
Review by Mike G. (Posted on 6/27/2016)
-
-
Zero Bullets 40 S&W / 10mm Auto (.400" Diameter) 180 Grain FMJ-TC - 500 Projectiles
$79.85Cost Per Bullet 16¢ per bullet Product Type Bullets Bullet Weight 180 Grain Bullet Caliber 10mm, 40 Caliber, 40 S&W Quantity 500 Bullet Type Full Metal Jacket Truncated Cone (FMJTC) Manufacturer Zero Bullet Manufacturer SKU R143 Save some cash when you create your own 10mm and .40 S&W rounds for practice and matches. These projectiles from Zero Bullets use proper copper jackets in a full metal jacket truncated cone (FMJ-TC) shape. Truncated cone style bullets are similar to a semi-wadcutter with a sloping ogive and flat nose which leaves nice clean holes in targets for clean scoring and group measurement. These bullets weigh 180 grains which is ideal for many recipes of both calibers. Zero Bullets is an Alabama manufacturer that has a great reputation for offering consistent projectiles at a low cost.
Don't forget to check out Widener's great selection of pistol powders, while you're here!Customer Reviews
-
Excellent store
-
Great price fast shipping
Review by Mike (Posted on 4/2/2023)
-
Great
-
These are great to use at the range. They are very well made and have no blemishes. A good buy, at a good price.
Review by Hawkeye (Posted on 4/2/2023)
-
Zero in with Zero brand bullets
-
Have been quite happy with these and other Zero brand bullets I have used over the years. They make a high quality product at a reasonable price.
Review by gunnermcleod (Posted on 5/8/2017)
-
-
Hornady .400 Diameter Bullets - 200 Grain XTP – 100 Count
$28.85- Buy 5 at $25.85 /each and save
Cost Per Bullet 25.8¢ to 28.8¢ per bullet Product Type Bullets Bullet Weight 200 Grain Bullet Caliber 10mm, 40 S&W Quantity 100 Bullet Type XTP Manufacturer Hornady Manufacturer SKU 40060 This is not loaded ammunition. You cannot fire these components bullets right out of the box. You have to load them first, just like you have to cook a Thanksgiving turkey before you can eat it.
Are you loading your own 40 S&W self-defense loads? Are you loading your own 10mm hunting loads? Or are you just trying to create the most accurate .40 cal cartridges possible? It all starts with the Hornady eXtreme Terminal Performance.
When you load these 0.400” diameter 200 grain bullets, you get to appreciate just how many features Hornady is able to pack into a single drawn gilding metal jacket. The XTP’s protective jacket doesn’t let its swaged lead core touch the feed ramp, and it also keeps the nose cavity’s rim from deforming during initial impact. That preserves the jacketed hollow point’s ability to produce wide terminal expansion. The XTP’s jacket is notched, and it becomes increasingly thinner the closer it gets to the rim – two features which also promote more reliable expansion. Its core uniformity and jacket concentricity also give the XTP awesome accuracy. You will not be misusing these bullets if you only load them in match rounds!
Hornady is one of America’s most respected bullet manufacturers. Uniform in weight and dimensions, their XTP represents the old Nebraskan company’s very best work!Customer Reviews
-
Excellent
-
Hard hitting.
Review by Arbcruiser (Posted on 3/5/2023)
-
Great bullet
-
Love these bullets, buy them when ever they are on sale. Very hard hitting HP.
Review by PCFlorida (Posted on 9/4/2016)
-
Nosler .400 Diameter Bullets - 180 Grain JHP - 250 Count
$99.85Cost Per Bullet 39.9¢ per bullet Product Type Bullets Bullet Weight 180 Grain Bullet Caliber 10mm, 40 S&W Quantity 250 Bullet Type Jacketed Hollow-Point (JHP) Manufacturer Nosler Ammunition Manufacturer SKU 44885 With this box of Nosler bullets, you’ll get 250 180 grain jacketed hollow point bullets for your empty .40 cal cases. The jacket ensures smooth feeding and reliable performance in the barrel, with little fouling. The hollow point tip is excellent at giving terminal performance with controlled expansion and penetration.
The .40 S&W has a rich heritage of performance, accuracy, and power. It’s one of the top cartridges for law enforcement, and has been used for self defense for decades. Getting the target practice you need is essential, so when ammo prices add up, many gun owners choose to reload their spent .40 S&W cases with high-quality ammo like these Nosler 180-grain bullets.
Whether you need reloading bullets for your empty .40 S&W cases or want complete cartridges for big game hunting, Nosler has the items you are looking for. They create some of the most reliable ammo supplies available and hold a well-earned reputation for quality.
Customer Reviews
-
QUALITY!!
-
Quite frankly these bullets performed exactly as I expected. Loaded them for my 10mm Glock G40 long slide with Blue Dot. Nice grouping at 50 feet. ( indoor range ) Will hunt whitetail and hogs with these bullets.
Review by Rodney (Posted on 7/25/2017)
-
Makes a great round
-
Have used these in loading 40 S&W rounds and have been very pleased with the results; plan to also load some 10mm rounds with them to see if they perform as well there.
Review by gunnermcleod (Posted on 5/8/2017)
-
